The new series of electronic controllers Fire / 503 of IMIT Control System consists of 4 devices built in three modules, all compatible with the plaques Most commercially.
Fire / 503 Water (art. 560831) is a controller for fireplaces very simple: in the ON position enables the circulating pump of a water system that is activated as a function of the temperature value. Grill is located can also turn any rotisserie. The temperature is set using a knob and displayed on a two-digit LED display. In the OFF position by only the antifreeze function.
The controller Fire / 503 Water-N (art. 578277) is able to control two circulators, a diverter valve to 3 streets and an auxiliary output configurable as a thermostat, grill function, or to operate an installation of water heating with more generators (eg. gas boiler combined with fireplace / heater). It can also handle production systems DHW and has anti-freeze and anti-blocking functions. Flexibly configurable via a keyboard 6 keys, the LCD displays the water temperature detected by the sensor, the output status and any error messages.
Recently conception Fire Water HID (art. 578257), an electronic controller with low power consumption in stand-by. Primarily designed to handle separation modules for hydraulic systems of water heating with several generators (eg. Gas boiler combined with fireplace / heater), with or without production of domestic hot water (DHW). It lends itself to customization evolutions and software of various kinds, for use in other applications thermohydraulic mixed with sources of energy (biomass, solar thermal, water accumulation, etc.). It can control two circulators, a diverter valve 3 streets and an auxiliary output with changeover contact, in addition to reading the three inputs (temperature sensors, flow switches, etc). It has anti-freeze and anti-blocking functions. Configurable via a keyboard 4 keys, display, blue LED displays the water temperature, the output status and any error messages.
Fire / 503 Air-N (art. 578276), finally, is an electronic controller for fireplaces air, which activates and regulates the speed of a centrifugal fan for the spread in the environment of air heated by a hearth solid fuel. Can be used in automatic or manual, is equipped with Auto Start the fan in case of high temperature. The LCD display shows the temperature detected by the sensor and the one set by the user, in addition to the operating status and any faults.
With products IMIT Control System you can fully enjoy the warmth of your fireplace safely, saving energy.
More information about: www.imit.it
